4471608580 Auto Air Cond Compressor For Toyota Innova For Hilux 2.8 WXTT163

4471608580 Auto Air Cond Compressor For Toyota Innova For Hilux 2.8 WXTT163

The automobile compressor is the core component of the air conditioning system. It is responsible for compressing the refrigerant into high-temperature and high-pressure gas and cooling the air in the car through circulation. When you turn on the air conditioning switch in your car, the compressor will be activated and start working. It obtains power from the engine through an electromagnetic clutch and drive belt, and circulates refrigerant to the evaporator and condenser for heat exchange. This process cools and dehumidifies the air inside the car, providing a comfortable driving environment. The effectiveness and normal operation of the vehicle's air conditioning largely depends on the working status of the compressor.

Parameter:

Goods Picture

If Compressor Noises from Under the Hood

When unusual noises arise from your vehicle, particularly concerning the air conditioning system, it is usually an indication of a problem. This includes the AC compressor, which has the crucial task of compressing and circulating the refrigerant for the air conditioning. During your daily driving, the compressor regularly goes through cycles of turning on and off, causing wear and tear on its components over time.

One common issue is with the sealed bearing within the AC compressor, which can deteriorate or seize up when the lubricant leaks out. This can lead to a high-pitched squeal or a grinding noise resembling metal-on-metal. If the bearing seizes, the drive belt may emit a squealing sound as it fails to rotate the compressor.

Repairing AC compressors is sometimes possible, but in most cases, replacing the faulty compressor with a new one is a more effective and durable solution. Not only does this save time, but it also ensures a higher-quality repair.

AC compressor replacement process.

1. Drain the refrigerant: Before starting the disassembly, the technician needs to use special equipment to drain the refrigerant from the entire air conditioning system to ensure work safety. This is very important because refrigerants are toxic and harmful to the environment when released into the atmosphere.

2. Remove the drive belt: The technician will remove the drive belt from the AC compressor clutch pulley and separate the clutch from the wires. This makes it easier to remove and replace the compressor.

3. Disconnect the refrigeration lines: The technician will need to disconnect the low-pressure and high-pressure refrigeration lines that are connected to the compressor body. These lines are usually connected by quick connectors that technicians can remove using special tools.

4. Replace the compressor: The technician will unbolt the damaged compressor and remove it. They will then install a new AC compressor and re-tighten it.

5. Reconnect lines and drive belts: Once the new compressor is installed, technicians will reconnect the low-pressure and high-pressure refrigeration lines. They will then reattach the drive belt and wires, making sure everything is connected correctly.

6. Refrigerant charge: After replacing the compressor, the refrigerant in the air conditioning system has been drained, so the technician needs to recharge the refrigerant according to the manufacturer's specifications. This often requires the use of special tools and equipment to ensure proper filling.

7. Verify system operation: Once the refrigerant charge is complete, the technician will test and confirm that the AC system is operating properly. They will check various functions of the air conditioner, such as the amount of air being blown out and the temperature, to make sure everything is working properly.

This is the rough AC compressor replacement process. Remember, before any air conditioning system repair or replacement work is performed, it is best to have it performed by a professional air conditioning technician to ensure the work is done safely and correctly.

Product Type